Ningbo Xin Chang Machinery Co.,Ltd
ブランド: 新昌市
についてのサポート: 100 Sets/Month
特徴：
高分子拡散溶接機は銅溶接機とアルミニウム溶接機の2種類に分けられます。新エネルギー自動車、パワーバッテリーソフト接続、パワーソフト接続の生産に特化した抵抗溶接機です。その利点は、はんだが不要であること、跡が残らない溶接、およびワークピースの滑らかな外観です。この製品は、新エネルギー車、動力電池、配電盤、変圧器、電力設備およびその他の産業で広く使用されています。当社が独自に開発・製造した高分子拡散溶接機は中国トップレベルです。業界内で長年にわたり多くの企業で愛用されており、国内のカスタマイズ自動溶接機メーカーからもユーザーレビューが良く、高い評価を得ています。| 1 | Suitable for soft aluminum sheets welding, also capable of surface nickel welding, copper-aluminum welding, aluminum-aluminum welding. |
| 2 | Heating temperature:≥800ºC,Temperature measurement range:300ºC-1400ºC,Process accuracy:±3. Temperature, pressure, time, etc. can be adjusted and displayed on the touch screen . |
| 3 | The equipment mainly uses gas-liquid booster cylinders and precision pressure regulating valves to control the pressure to achieve the product welding process thickness tolerance requirements.. |
| 4 | Graphite installation area:130*80*70mm |
| 5 | Effective welding area:100*100mm (The product requirements of larger welding area can be achieved through segmented welding) |
| 5 | Electrode installation area:140mm*90mm |
| 6 | Welding material thickness:0.03mm-5mm |
| 7 | Welding product thickness:0.5mm-25mm |
| 8 | Cooling water requirements: The water flow rate requirement is 12m³/h, the head is 20 meters, or an equivalent booster pump can meet the mass production needs. Cooling water requirements:
|
| 9 | Aluminum foil meets batch single-piece peel strength≥3N/mm² |
| 10 | Digital hydraulic cylinder pressurization, max output pressure 10T,starting pressure 50KG,adjustment step unit 10Kg,set pressure accuracy within ±5% FS,welding accuracy ±0.1mm. Welding stability is determined by sir pressure. |
| 11 | C type vertical welding table |
| 12 | Power wiring:≥70mm2 Copper core wire, three-phase five-wire system. Incoming power requirements:
|
| 13 | High frequency heating, rated power 100KVA |
| 14 | Noise level below 65 decibels |
| 15 | Grey, close to RAL9010 paint |
| 16 | 1,The equipment is equipped with safety devices during operation, which can put the system into grounding state in any abnormal operation to ensure no high voltage load. 2,There are no obvious sharp parts on the outside of the device to prevent injuries to people during use. 3,Parts of the equipment that pose safety risks should be clearly marked, such as anti-electric shock sign and warning sign. 4,The equipment has the function of water temperature, water flow, current, voltage, and phase loss abnormal alarm and shutdown protection. |
| 17 |
3. The equipment must not misappropriate the protected patent technology of a third party. Party B shall be responsible for any disputes arising therefrom, and Party A shall not be responsible. |
| 18 | The equipment has functions such as quick release, quick change, graphite fixture, etc. |
今連絡する